Tel：0086-631-5626901
Fax：0086-631-5626903
Contact：Mr. Xing
E-mail：xxk737@163.com
Add：No.455,Shichang Road, Hi-tech Development Zone,Weihai,Shandong,China
Three-component geophones are special detector used in multi-wave exploration. With conventional single-component geophones different, each detector built with three mutually perpendicular sensors to record the three components of particle velocity vectors for simultaneous recording longitudinal waves, shear waves, converted waves.
Three-component geophones are used to measure the formation of a P-wave and S-wave velocity of equipment. It consists of the following three components: three-component geophones, and the borehole wall for the effective contact pressure device system, and the internal integration of the supply pipe cables. In the detector means, using a geophone moving coil by a vertical component and two horizontal components to. The system and the effective pressure-receiving means in contact with the borehole wall, using a pressure, expansion, expansion detector outer rubber tube method, the detector may be good that the contact pressure on the hole wall. Furthermore, the supply pipe integrated within the cable may be used for transmission of signals from the detector, but also for supplying air pressure, and to provide a rubber tube is inflated. Features of this device are: the PS logging is very effective, the size is very lightweight (hand-held), easy to operate.
Three-component geophones are used to measure the formation of a P-wave and S-wave velocity of equipment. It consists of the following three components: three-component geophones, and the borehole wall for the effective contact pressure device system, and the internal integration of the supply pipe cables. In the detector means, using a geophone moving coil by a vertical component and two horizontal components to. The system and the effective pressure-receiving means in contact with the borehole wall, using a pressure, expansion, expansion detector outer rubber tube method, the detector may be good that the contact pressure on the hole wall. Furthermore, the supply pipe integrated within the cable may be used for transmission of signals from the detector, but also for supplying air pressure, and to provide a rubber tube is inflated. Features of this device are: the PS logging is very effective, the size is very lightweight (hand-held), easy to operate.
- Previous：Laser speed sensor
- Next：Sensor market prospects
WEIHAI GRAND EXPLORATION INSTRUMENT CO.,LTD Main products are | Vibration sensor | Speedometer | DetectorWait
Site images and content network sources, belongs to original author or company, if you believe we have violated your copyright, pro-informed! We will delete it immediately.